YIWU YUXING IMPORT AND EXPORT FIRM
YIWU YUXING IMPORT AND EXPORT FIRM ONE STOP SHOPPING GET YOUR MONEY'S WORTH
Add to Cart
4. Type720 waste paper pulp cleaning fluffer made by stainless steel
The fiber separator is a screening and pulping equipment with a combination of disintegration, separation and screening functions to remove various impurities in the waste paper raw materials by utilizing the specific gravity difference between fibers and impurities. The steel cone-shaped tank is a horizontal device. Continuous impeller separator, transmission mechanism, slag discharge mechanism, etc.
structure:
The impeller separator consists of an impeller, a separation bottom knife, a sieve plate, a slurry receiving groove, and a transmission mechanism.
The impeller is designed as an open turbine with curved fins. The vane has a leading angle. When the impeller rotates, the liquid discharge is large, which increases the circulation rate and generates a strong centrifugal effect. It can also push light impurities to the center outlet of the front cover. The impeller is generally made of ZG45. Abrasive alloy, special cast stainless steel.
The fixed knife of the fiber separator is installed around the impeller, and the gap between the impeller and the impeller is adjusted by bolts. The material of the knife is ZG45 or ZG40.
The sieve plate has a full-sorting structure, and the sieve hole specifications are Φ2.5, Φ3, Φ4, and Φ5.
Φ4 is the standard specification, and the screen plate material is stainless steel.
The impeller separator adopts a V-belt transmission and a double-fulcrum combined bearing structure. The bearing support is composed of a slurry receiving trough and a trough body, which are respectively carried on the cement foundation.
The cone groove is made of steel plate welding, there is a tangential slurry inlet at the top, a spiral groove slag discharge bucket below, a tapered front cover with a scum discharge outlet, the front cover is fixed to the groove with bolts, and is equipped with a hinge structure. To be used for cleaning and maintenance.
Specification:
| Model | PFS-1 | ZDF2 | ZDF3 |
| Capacity(T/24H) | 40-80 | 60-100 | 80-130 |
| Impeller diameter(mm) | Φ600 | Φ720 | Φ800 |
| Pulp consistency(%) | 2.5-4 | ||
| Screen plate diameter(mm) | Φ2.5-5 | ||
| Pulp inlet diameter(mm) | Φ150 | Φ200 | Φ250 |
| Pulp outlet diameter(mm) | Φ150 | Φ200 | Φ250 |
| Pulp inlet pressure(kg/cm2) | 1.2-3 | ||
| Pressure loss(kg/cm2) | 0.4-0.6 | ||
| Power(kw) | 45 | 75 | 110/90 |
