YIWU YUXING IMPORT AND EXPORT FIRM
YIWU YUXING IMPORT AND EXPORT FIRM ONE STOP SHOPPING GET YOUR MONEY'S WORTH
Add to Cart
The Whole Stainless Steel Reject Sortor Machine For Second Stage Of Coarse Pulp Cleaning In The Stock Preparation
1. Introduction
Features: This machine is mainly used for the treatment of tailings in the screening section of the waste paper system. The incoming pulp concentration is about 1-3%, and the slag concentration can reach 20%. The processing efficiency is high, the fiber retention rate is high, and the recovery rate can reach 80. % Or more; only normal pressure operation is required, and it is a closed operation to avoid dirt splashing, save the cost of slag disposal, and fast long-term investment recovery.
2. Main technicals
| model | PR1 | PR2 | PR3 |
| Specification | Φ280 | Φ380 | Φ500 |
| Inlet pulp consistency % | 1-3.5 | ||
| dump consistency % | 15-20 | ||
| capacity t/d | 10-20 | 20-35 | 40-70 |
| motor kw | 22 | 37 | 55 |
3.structure introduction
1. The cylinder body is welded by steel plates, the part in contact with the slurry is made of stainless steel, and there are eight water spray pipes on both sides of the cylinder body.
2. The rotor is a rotating rod with 32 blades fixed on it.
3. The sieve plate is a combination of two semi-circular sieve cylinders with diameter Φ2.0-Φ4.5mm, which can be selected according to needs
